With the use of a wide range of strategies offered by InventorCAM for turning, milling, turning-milling and electro-erosion machining, a technologist can quickly prepare the necessary set of control programs for machining a product. This system is a complete solution for automation of metalworking production. InventorCAM is a new generation CAD / CAM system developed by Israeli firm SolidCAM Ltd (Official distributor in Russia - Consistent Software). The last thing we do is make sure the parts are flush and grounded.InventorCAM 2022 SP1 for Autodesk Inventor 2018-2022 28" for when we do a finishing and a roughing pass. Now that they are mated together we want to create an offset of. We went into the back support and removed the taper we created in order to allow both parts to constrain to each other as mated. We will first use the flush or side-by-side constraint. We have the router and the back support now separated and we want to lay them flat as close to each other as possible. In order to do this we will need to remove all the constraints we made. We will be using the same plane to spread everything out. The first thing we delete are the screws and the cross dowels as we will not need to fabricate these. Now we have the new file and we now we will delete what we do not need. We copy the existing assembly file so we can break parts off the existing file.
We're going to create a new assembly file for this. The first thing to do for CAM prep is to lay the parts out as if they we will laid out as on a sheet. In part 8 of the series we will be showing how to lay out parts for CAM work.
0 kommentar(er)
